SUD45P03-10 p-channel 30-v (d-s), mosfet features ? trenchfet ? power mosfets product summary v ds (v) r ds(on) ( ) i d (a) a - 30 0.010 at v gs = - 10 v - 15 0.018 at v gs = - 4.5 v - 12 to-252 s gd top view drain connected to tab ordering information: SUD45P03-10-e3 (lead (pb)-free) s g d p-channel mosfet notes: a. calculated rating for t a = 25 c, for comparison purposes only. this cannot be used as continuous rating (s ee absolute maximum ratings and typical char acteristics). b. surface mounted on fr4 board, t 10 s. absolute maximum ratings t a = 25 c, unless otherwise noted parameter symbol limit unit drain-source voltage v ds - 30 v gate-source voltage v gs 20 continuous drain current b t a = 25 c i d - 15 a t a = 100 c - 8 pulsed drain current i dm - 100 continuous source current (diode conduction) i s - 15 maximum power dissipation b t c = 25 c p d 70 w t a = 25 c 4 b operating junction and storage temperature range t j , t stg - 55 to 150 c thermal resistance ratings parameter symbol typical maximum unit maximum junction-to-ambient b r thja 30 c/w maximum junction-to-case r thjc 1.8 rohs compliant www.freescale.net.cn 1 / 7 vishay siliconix SUD45P03-10 document number: 70766 s-81734-rev. e, 04-aug-08 www.vishay.com 1 p-channel 30-v (d-s), mosfet features ? trenchfet ? power mosfets product summary v ds (v) r ds(on) ( : ) i d (a) a - 30 0.010 at v gs = - 10 v - 15 0.018 at v gs = - 4.5 v - 12 to-252 s gd top view drain connected to tab ordering information: SUD45P03-10-e3 (lead (pb)-free) s g d p-channel mosfet notes: a. calculated rating for t a = 25 c, for comparison purposes only. this cannot be used as continuous rating (s ee absolute maximum ratings and typical char acteristics). b. surface mounted on fr4 board, t d 10 s. absolute maximum ratings t a = 25 c, unless otherwise noted parameter symbol limit unit drain-source voltage v ds - 30 v gate-source voltage v gs 20 continuous drain current b t a = 25 c i d - 15 a t a = 100 c - 8 pulsed drain current i dm - 100 continuous source current (diode conduction) i s - 15 maximum power dissipation b t c = 25 c p d 70 w t a = 25 c 4 b operating junction and storage temperature range t j , t stg - 55 to 150 c thermal resistance ratings parameter symbol typical maximum unit maximum junction-to-ambient b r thja 30 c/w maximum junction-to-case r thjc 1.8 rohs compliant
notes: a. pulse test; pulse width 300 s, duty cycle 2 %. b. guaranteed by design, not s ubject to production testing. c. independent of operating temperature. stresses beyond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other condit ions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. specifications t j = 25 c, unless otherwise noted parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = - 250 a - 30 v gate threshold voltage v gs(th) v ds = v gs , i d = - 250 a - 1.0 - 3.0 gate-body leakage i gss v ds = 0 v, v gs = 20 v 100 na zero gate voltage drain current i dss v ds = - 30 v, v gs = 0 v - 1 a v ds = - 30 v, v gs = 0 v, t j = 125 c - 50 on-state drain current a i d(on) v ds = - 5 v, v gs = - 10 v - 50 a v ds = - 5 v, v gs = - 4.5 v - 20 drain-source on-state resistance a r ds(on) v gs = - 10 v, i d = - 15 a 0.010 v gs = - 10 v, i d = - 15 a, t j = 125 c 0.015 v gs = - 4.5 v, i d = - 15 a 0.018 forward transconductance a g fs v ds = - 15 v, i d = - 15 a 20 s dynamic b input capacitance c iss v gs = 0 v, v ds = - 25 v, f = 1 mhz 6000 pf output capacitance c oss 1100 reverse transfer capacitance c rss 700 total gate charge c q g v ds = - 15 v, v gs = - 10 v, i d = - 45 a 90 150 nc gate-source charge c q gs 20 gate-drain charge c q gd 16 tu r n - o n d e l ay t i m e c t d(on) v dd = - 15 v, r l = 0.33 i d ? - 45 a, v gen = - 10 v, r g = 2.4 15 25 ns rise time c t r 375 550 turn-off delay time c t d(off) 100 200 fall time c t f 140 250 source-drain diode ratings and characteristic t c = 25 c pulsed current i sm 100 a diode forward voltage a v sd i f = - 45 a, v gs = 0 v 1.0 1.5 v source-drain reverse recovery time t rr i f = - 45 a, di/dt = 100 a/s 55 100 ns SUD45P03-10 p-channel 30-v (d-s), mosfet www.freescale.net.cn 2 / 7 www.vishay.com 2 document number: 70766 s-81734-rev. e, 04-aug-08 vishay siliconix SUD45P03-10 notes: a. pulse test; pulse width d 300 s, duty cycle d 2 %. b. guaranteed by design, not s ubject to production testing. c. independent of operating temperature. stresses beyond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other condit ions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. specifications t j = 25 c, unless otherwise noted parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = - 250 a - 30 v gate threshold voltage v gs(th) v ds = v gs , i d = - 250 a - 1.0 - 3.0 gate-body leakage i gss v ds = 0 v, v gs = 20 v 100 na zero gate voltage drain current i dss v ds = - 30 v, v gs = 0 v - 1 a v ds = - 30 v, v gs = 0 v, t j = 125 c - 50 on-state drain current a i d(on) v ds = - 5 v, v gs = - 10 v - 50 a v ds = - 5 v, v gs = - 4.5 v - 20 drain-source on-state resistance a r ds(on) v gs = - 10 v, i d = - 15 a 0.010 : v gs = - 10 v, i d = - 15 a, t j = 125 c 0.015 v gs = - 4.5 v, i d = - 15 a 0.018 forward transconductance a g fs v ds = - 15 v, i d = - 15 a 20 s dynamic b input capacitance c iss v gs = 0 v, v ds = - 25 v, f = 1 mhz 6000 pf output capacitance c oss 1100 reverse transfer capacitance c rss 700 total gate charge c q g v ds = - 15 v, v gs = - 10 v, i d = - 45 a 90 150 nc gate-source charge c q gs 20 gate-drain charge c q gd 16 tu r n - o n d e l ay t i m e c t d(on) v dd = - 15 v, r l = 0.33 : i d # - 45 a, v gen = - 10 v, r g = 2.4 : 15 25 ns rise time c t r 375 550 turn-off delay time c t d(off) 100 200 fall time c t f 140 250 source-drain diode ratings and characteristic t c = 25 c pulsed current i sm 100 a diode forward voltage a v sd i f = - 45 a, v gs = 0 v 1.0 1.5 v source-drain reverse recovery time t rr i f = - 45 a, di/dt = 100 a/s 55 100 ns
typical characteristics 25 c, unless otherwise noted output characteristics transconductance capacitance v ds - drain-to-source voltage (v) - drain current (a) i d 0 50 100 150 200 250 0246810 5 v v gs = 10, 9, 8, 7 v 3 v 4 v 6 v 0 20 40 60 80 0 1020304050 - transconductance (s) g fs t c = - 55 c 25 c 125 c i d - drain current (a) 0 2000 4000 6000 8000 0 5 10 15 20 25 30 v ds - drain-to-source voltage (v) c - capacitance (pf) c rss c oss c iss transfer characteristics on-resistance vs. drain current gate charge v gs - gate-to-source voltage (v) - drain current (a) i d 0 20 40 60 80 100 012345 25 c - 55 c t c = 125 c - on-resistance ( ) i d - drain current (a) r ds(on) 0.00 0.01 0.02 0.03 0.04 0.05 0 20406080100 v gs = 10 v v gs = 4.5 v - gate-to-source voltage (v) q g - total gate charge (nc) v gs 0 4 8 12 16 20 0 30 60 90 120 v ds = 15 v i d = 45 a SUD45P03-10 p-channel 30-v (d-s), mosfet www.freescale.net.cn 3 / 7 document number: 70766 s-81734-rev. e, 04-aug-08 www.vishay.com 3 vishay siliconix SUD45P03-10 typical characteristics 25 c, unless otherwise noted output characteristics transconductance capacitance v ds - drain-to-source voltage (v) - drain current (a) i d 0 50 100 150 200 250 0246810 5 v v gs = 10, 9, 8, 7 v 3 v 4 v 6 v 0 20 40 60 80 0 1020304050 - transconductance (s) g fs t c = - 55 c 25 c 125 c i d - drain current (a) 0 2000 4000 6000 8000 0 5 10 15 20 25 30 v ds - drain-to-source voltage (v) c - capacitance (pf) c rss c oss c iss transfer characteristics on-resistance vs. drain current gate charge v gs - gate-to-source voltage (v) - drain current (a) i d 0 20 40 60 80 100 012345 25 c - 55 c t c = 125 c - on-resistance ( ) i d - drain current (a) r ds(on) 0.00 0.01 0.02 0.03 0.04 0.05 0 20406080100 v gs = 10 v v gs = 4.5 v - gate-to-source voltage (v) q g - total gate charge (nc) v gs 0 4 8 12 16 20 0 30 60 90 120 v ds = 15 v i d = 45 a
typical characteristics 25 c, unless otherwise noted thermal ratings on-resistance vs. junction temperature (normalized) - on-resistance t j - junction temperature (c) r ds(on) 0.0 0.4 0.8 1.2 1.6 2.0 - 50 - 25 0 25 50 75 100 125 150 v gs = 10 v i d = 45 a source-drain diode forward voltage v sd - source-to-drain voltage (v) - source current (a) i s 100 10 1 0.3 0.6 0.9 1.2 1.5 t j = 25 c t j = 150 c 0 maximum drain current vs. ambient temperature 0 4 8 12 16 20 0 25 50 75 100 125 150 t a - ambient temperature (c) - drain current (a) i d safe operating area 500 10 0.1 0.1 1 10 100 limited by r ds(on)* 1 100 t a = 25 c single pulse 1 ms 10 ms 100 ms dc 10, 100 s 1 s v ds - drain-to-source voltage (v) *v gs > minimum v gs at which r ds(on) is specified - drain current (a) i d normalized thermal transient im pedance, junction-to-ambient square wave pulse duration (s) 2 1 0.1 0.01 10 -4 10 -3 10 -2 10 -1 110 normalized effective transient thermal impedance 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 500 100 SUD45P03-10 p-channel 30-v (d-s), mosfet www.freescale.net.cn 4 / 7 www.vishay.com 4 document number: 70766 s-81734-rev. e, 04-aug-08 vishay siliconix SUD45P03-10 typical characteristics 25 c, unless otherwise noted thermal ratings vishay siliconix maintains worldwide manufacturing capability. products may be manufactured at one of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?70766. on-resistance vs. junction temperature (normalized) - on-resistance t j - junction temperature (c) r ds(on) 0.0 0.4 0.8 1.2 1.6 2.0 - 50 - 25 0 25 50 75 100 125 150 v gs = 10 v i d = 45 a source-drain diode forward voltage v sd - source-to-drain voltage (v) - source current (a) i s 100 10 1 0.3 0.6 0.9 1.2 1.5 t j = 25 c t j = 150 c 0 maximum drain current vs. ambient temperature 0 4 8 12 16 20 0 25 50 75 100 125 150 t a - ambient temperature (c) - drain current (a) i d safe operating area 500 10 0.1 0.1 1 10 100 limited by r ds(on)* 1 100 t a = 25 c single pulse 1 ms 10 ms 100 ms dc 10, 100 s 1 s v ds - drain-to-source voltage (v) *v gs > minimum v gs at which r ds(on) is specified - drain current (a) i d normalized thermal transient im pedance, junction-to-ambient square wave pulse duration (s) 2 1 0.1 0.01 10 -4 10 -3 10 -2 10 -1 110 normalized effective transient thermal impedance 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 500 100
to-252aa case outline note ? dimension l3 is for reference only. l2 d l1 l3 b b1 e1 e1 d1 a1 c a2 gage plane height (0.5 mm) e b2 e c1 a l h millimeters inches dim. min. max. min. max. a 2.21 2.38 0.087 0.094 a1 0.89 1.14 0.035 0.045 a2 0.030 0.127 0.001 0.005 b 0.71 0.88 0.028 0.035 b1 0.76 1.14 0.030 0.045 b2 5.23 5.44 0.206 0.214 c 0.46 0.58 0.018 0.023 c1 0.46 0.58 0.018 0.023 d 5.97 6.22 0.235 0.245 d1 4.10 4.45 0.161 0.175 e 6.48 6.73 0.255 0.265 e1 4.49 5.50 0.177 0.217 e 2.28 bsc 0.090 bsc e1 4.57 bsc 0.180 bsc h 9.65 10.41 0.380 0.410 l 1.40 1.78 0.055 0.070 l1 0.64 1.02 0.025 0.040 l2 0.89 1.27 0.035 0.050 l3 1.15 1.52 0.040 0.060 ecn: t11-0110-rev. l, 18-apr-11 dwg: 5347 SUD45P03-10 p-channel 30-v (d-s), mosfet www.freescale.net.cn 5 / 7 document number: 71197 www.vishay.com 18-apr-11 1 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package information vishay siliconix to-252aa case outline note ? dimension l3 is for reference only. l2 d l1 l3 b b1 e1 e1 d1 a1 c a2 gage plane height (0.5 mm) e b2 e c1 a l h millimeters inches dim. min. max. min. max. a 2.21 2.38 0.087 0.094 a1 0.89 1.14 0.035 0.045 a2 0.030 0.127 0.001 0.005 b 0.71 0.88 0.028 0.035 b1 0.76 1.14 0.030 0.045 b2 5.23 5.44 0.206 0.214 c 0.46 0.58 0.018 0.023 c1 0.46 0.58 0.018 0.023 d 5.97 6.22 0.235 0.245 d1 4.10 4.45 0.161 0.175 e 6.48 6.73 0.255 0.265 e1 4.49 5.50 0.177 0.217 e 2.28 bsc 0.090 bsc e1 4.57 bsc 0.180 bsc h 9.65 10.41 0.380 0.410 l 1.40 1.78 0.055 0.070 l1 0.64 1.02 0.025 0.040 l2 0.89 1.27 0.035 0.050 l3 1.15 1.52 0.040 0.060 ecn: t11-0110-rev. l, 18-apr-11 dwg: 5347
recommended minimum pads for dpak (to-252) 0.420 (10.668) recommended mi nimum pads dimensions in inches/(mm) 0.224 (5.690) 0.180 (4.572) 0.055 (1.397) 0.243 (6.180) 0.087 (2.202) 0.090 (2.286) return to index return to index SUD45P03-10 p-channel 30-v (d-s), mosfet www.freescale.net.cn 6 / 7 application note 826 vishay siliconix document number: 72594 www.vishay.com revision: 21-jan-08 3 application note recommended minimum pads for dpak (to-252) 0.420 (10.668) recommended mi nimum pads dimensions in inches/(mm) 0.224 (5.690) 0.180 (4.572) 0.055 (1.397) 0.243 (6.180) 0.087 (2.202) 0.090 (2.286) return to index return to index
SUD45P03-10 p-channel 30-v (d-s), mosfet www.freescale.net.cn 7 / 7 disclaimer material category policy all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. freestyle intertechnology, inc., its affiliates, agents, and employees, and all persons acting on it s or their behalf (collectively, ?freestyle?), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. freestyle makes no warranty, representation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on freestyle?s knowledge of typical requirements that are often placed on freestyle products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customer?s responsib ility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify freestyle?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, freestyle products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the freestyle product could result in personal injury or death. customers using or selling freestyle products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold freestyle and its distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay freestyle intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the european parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some freestyle documentation may still make reference to rohs directive 2002/95/ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
